Ball valvesARD-BV-014
Connection optionsElectric top-entry cryogenic trunnion ball valve
RF / RTJ flanged / butt weld (BW)
A top-entry trunnion package for cryogenic isolation where access through a service cover is part of the maintenance plan. Motor-operated isolation for installations where electrical power and remote position control are required.
Size and pressure options require technical confirmation.
- Size
- DN 50-600 / NPS 2-24
- Body material
- Cryogenic stainless steel; selected grade to confirm
- Connections
- RF / RTJ flanged / butt weld (BW)
- Operation
- Electric quarter-turn actuator
- Pressure
- ASME Class 150-900
- Temperature
- Down to -196°C; upper limit to confirm
Engineered for your application
A top-entry trunnion package for cryogenic isolation where access through a service cover is part of the maintenance plan. Motor-operated isolation for installations where electrical power and remote position control are required.
Series limits guide enquiry and are not verified availability or approved operating limits for every size, pressure and operator combination. Confirm the selected design and pressure-temperature rating.
Explore the related valve familyTechnical data
The specification, in detail.
| Parameter | Technical specification |
|---|---|
| Size range | DN 50-600 / NPS 2-24 |
| Pressure ratings | ASME Class 150-900 |
| Temperature range | Down to -196°C; upper limit to confirm |
| Construction | Top-entry body with service cover; trunnion-supported ball |
| Operation | Electric quarter-turn actuator |
| Medium | LNG / LPG; exact process medium to specify |
Nominal pressure and ASME class are different rating systems. Confirm the pressure–temperature rating for the selected material and design.
End connections
Define the interface.
Shown configuration: two RF flanged line connections
| Connection detail | Connection / selection requirement |
|---|---|
| Connection options | RF / RTJ flanged / butt weld (BW) |
| Mating interface | Confirm end standard, facing or weld preparation, pipe dimensions and installation envelope. |
The illustration shows one configuration. Published connection alternatives are options for enquiry; their availability depends on size, rating, material and design. Installation dimensions come from the drawing, not the illustration.
Materials
From body to seal.
| Component | Material / option |
|---|---|
| Body and bonnet | Cryogenic stainless steel; selected grade to confirm |
| Trim, seats and seals | Selected material schedule to confirm |
Published material alternatives are configuration-dependent. H.F. denotes hard facing; the exact grade and material certificates are confirmed with the offer.
Selection notes
Defined around your application.
- Top-entry service-cover architecture
- Extended stem keeps the drive above the cold zone
- Electric operating package
| Engineering data | Configuration requirement |
|---|---|
| Electrical interface | Specify voltage, frequency, duty cycle, local controls and command/feedback interface. |
| Mechanical protection | Confirm torque or thrust settings, end stops, travel limits, manual override and ambient enclosure requirements. |
Series limits guide enquiry and are not verified availability or approved operating limits for every size, pressure and operator combination. Confirm the selected design and pressure-temperature rating.
Loss-of-power behaviour, emergency operation and a modulating duty are selected separately; a motor alone does not establish fail-safe action.
Specify bore, differential pressure, seat arrangement, trapped-liquid relief and required test documentation.
Published ratings do not establish suitability for every listed medium. Oxygen cleaning, material compatibility, trapped-liquid relief and project approvals are specified for the selected assembly. Liquid-hydrogen and helium service require a separate temperature and material review.
Arden product datasheet
Product code ARD-BV-014 · Revision 2026-10-29. Product illustrations show one configuration; the approved order documentation defines the supplied assembly.
Download PDFDimensions
Plan the connection.
Need installation dimensions?
No numeric dimension table is published for this reference. Request a configuration-specific outline drawing with your enquiry.
Request dimensionsDocumentation
Product documents
Download the Arden data sheet for ARD-BV-014, or request the outline drawing for your selected configuration.
Product code ARD-BV-014 · Revision 2026-10-29. Illustrations show one configuration; approved order documentation defines the supplied assembly.
Explore the range
Another configuration?
Ball valvesARD-BV-013
Pneumatic top-entry cryogenic trunnion ball valve
- Size range
- DN 50-600 / NPS 2-24
- Pressure ratings
- ASME Class 150-900
- Temperature
- Down to -196°C; upper limit to confirm
- Connections
- RF / RTJ flanged / butt weld (BW)
- Medium
- LNG / LPG; exact process medium to specify
Ball valvesARD-BV-015
Hydraulic top-entry cryogenic trunnion ball valve
- Size range
- DN 50-600 / NPS 2-24
- Pressure ratings
- ASME Class 150-900
- Temperature
- Down to -196°C; upper limit to confirm
- Connections
- RF / RTJ flanged / butt weld (BW)
- Medium
- LNG / LPG; exact process medium to specify
Ball valvesARD-BV-016
Top-entry cryogenic floating ball valve
- Size range
- NPS 1/2-3
- Pressure ratings
- ASME Class 150-1500
- Temperature
- -196 to +80°C
- Connections
- RF flanged / butt weld (BW)
- Medium
- LNG / LPG; exact process medium to specify