Butterfly valvesARD-BF-006
Connection optionsElectric cryogenic triple-offset butterfly valve
Wafer / lug / RF flanged / butt weld (BW)
A large-diameter triple-offset butterfly operating package with a short axial body and an extended shaft. Motor-operated isolation for installations where electrical power and remote position control are required.
Size and pressure options require technical confirmation.
- Size
- NPS 3-72
- Body material
- Cryogenic stainless steel; selected grade to confirm
- Connections
- Wafer / lug / RF flanged / butt weld (BW)
- Operation
- Electric quarter-turn actuator
- Pressure
- ASME Class 150-600
- Temperature
- Down to -196°C; upper limit to confirm
Engineered for your application
A large-diameter triple-offset butterfly operating package with a short axial body and an extended shaft. Motor-operated isolation for installations where electrical power and remote position control are required.
Series limits guide enquiry and are not verified availability or approved operating limits for every size, pressure and operator combination. Confirm the selected design and pressure-temperature rating.
Explore the related valve familyTechnical data
The specification, in detail.
| Parameter | Technical specification |
|---|---|
| Size range | NPS 3-72 |
| Pressure ratings | ASME Class 150-600 |
| Temperature range | Down to -196°C; upper limit to confirm |
| Construction | Triple-offset disc; extended shaft |
| Operation | Electric quarter-turn actuator |
| Medium | LNG / LPG; exact process medium to specify |
Nominal pressure and ASME class are different rating systems. Confirm the pressure–temperature rating for the selected material and design.
End connections
Define the interface.
Shown configuration: a double-flanged butterfly body, open disc, long shaft extension and electric drive
| Connection detail | Connection / selection requirement |
|---|---|
| Connection options | Wafer / lug / RF flanged / butt weld (BW) |
| Mating interface | Confirm end standard, facing or weld preparation, pipe dimensions and installation envelope. |
The illustration shows one configuration. Published connection alternatives are options for enquiry; their availability depends on size, rating, material and design. Installation dimensions come from the drawing, not the illustration.
Materials
From body to seal.
| Component | Material / option |
|---|---|
| Body and bonnet | Cryogenic stainless steel; selected grade to confirm |
| Trim, seats and seals | Selected material schedule to confirm |
Published material alternatives are configuration-dependent. H.F. denotes hard facing; the exact grade and material certificates are confirmed with the offer.
Selection notes
Defined around your application.
- Triple-offset disc architecture
- Short body installation
- Electric drive above the extension
| Engineering data | Configuration requirement |
|---|---|
| Electrical interface | Specify voltage, frequency, duty cycle, local controls and command/feedback interface. |
| Mechanical protection | Confirm torque or thrust settings, end stops, travel limits, manual override and ambient enclosure requirements. |
Series limits guide enquiry and are not verified availability or approved operating limits for every size, pressure and operator combination. Confirm the selected design and pressure-temperature rating.
Loss-of-power behaviour, emergency operation and a modulating duty are selected separately; a motor alone does not establish fail-safe action.
Confirm sealing direction, seat construction, disc clearance and the selected flange or weld arrangement.
Published ratings do not establish suitability for every listed medium. Oxygen cleaning, material compatibility, trapped-liquid relief and project approvals are specified for the selected assembly. Liquid-hydrogen and helium service require a separate temperature and material review.
Arden product datasheet
Product code ARD-BF-006 · Revision 2026-10-29. Product illustrations show one configuration; the approved order documentation defines the supplied assembly.
Download PDFDimensions
Plan the connection.
Need installation dimensions?
No numeric dimension table is published for this reference. Request a configuration-specific outline drawing with your enquiry.
Request dimensionsDocumentation
Product documents
Download the Arden data sheet for ARD-BF-006, or request the outline drawing for your selected configuration.
Product code ARD-BF-006 · Revision 2026-10-29. Illustrations show one configuration; approved order documentation defines the supplied assembly.
Explore the range
Another configuration?
Butterfly valvesARD-BF-005
Pneumatic cryogenic triple-offset butterfly valve
- Size range
- NPS 3-72
- Pressure ratings
- ASME Class 150-600
- Temperature
- Down to -196°C; upper limit to confirm
- Connections
- Wafer / lug / RF flanged / butt weld (BW)
- Medium
- LNG / LPG; exact process medium to specify
Butterfly valvesARD-BF-007
Hydraulic cryogenic triple-offset butterfly valve
- Size range
- NPS 3-72
- Pressure ratings
- ASME Class 150-600
- Temperature
- Down to -196°C; upper limit to confirm
- Connections
- Wafer / lug / RF flanged / butt weld (BW)
- Medium
- LNG / LPG; exact process medium to specify
Butterfly valvesARD-BF-001
Triple-offset cryogenic butterfly valve
- Size range
- 2–42 in
- Pressure ratings
- ASME Class 150–900
- Temperature
- Down to −196°C
- Connections
- Butt weld (BW) · Flanged